Posted by mpate on September 2, 2008, 4:32 pm
Posted by Morris Dovey on September 2, 2008, 4:59 pm
mpate@oscintl.com wrote:
> Have you built one of these and can you point me to materials,
> designs, your experience, etc?
> The design and build might make a good homepower article.
Here's another type of Stirling cycle engine:
http://www.iedu.com/DeSoto/Projects/Stirling/
--
Morris Dovey
DeSoto Solar
DeSoto, Iowa USA
http://www.iedu.com/DeSoto/
Posted by mpate on September 2, 2008, 8:14 pm
> mp...@oscintl.com wrote:
> > Have you built one of these and can you point me to materials,
> > designs, your experience, etc?
> > The design and build might make a good homepower article.
> Here's another type of Stirling cycle engine:
> http://www.iedu.com/DeSoto/Projects/Stirling/
> --
> Morris Dovey
> DeSoto Solar
> DeSoto, Iowa USAhttp://www.iedu.com/DeSoto/
Hi Morris:
Thanks for the link, very interesting idea about using the fluidyne as
a pump to move the water up to an upper storage tanks and then drive a
generator on the way down to the collection tank?
The 1100 gal per hour seems quite impressive. Have you taken this
idea further to a complete system yet?
I also found the link below close to what I was looking for because of
your reference to fluidynes, so thanks for the nudge.
http://www.keveney.com/Stirling.html
Michael
Posted by Morris Dovey on September 3, 2008, 1:03 am
mpate@oscintl.com wrote:
> Thanks for the link, very interesting idea about using the fluidyne as
> a pump to move the water up to an upper storage tanks and then drive a
> generator on the way down to the collection tank?
You're very welcome. That's the basic idea - but think "lake" rather
than "tank" for one or both reservoirs.
> The 1100 gal per hour seems quite impressive. Have you taken this
> idea further to a complete system yet?
Nope. We're still working on engine efficiency and materials issues.
> I also found the link below close to what I was looking for because of
> your reference to fluidynes, so thanks for the nudge.
>
> http://www.keveney.com/Stirling.html
I'm glad it was helpful. Thanks for the link!
--
Morris Dovey
DeSoto Solar
DeSoto, Iowa USA
http://www.iedu.com/DeSoto/
Posted by Ulysses on September 3, 2008, 1:08 pm
> mp...@oscintl.com wrote:
> > Have you built one of these and can you point me to materials,
> > designs, your experience, etc?
> > The design and build might make a good homepower article.
> Here's another type of Stirling cycle engine:
> http://www.iedu.com/DeSoto/Projects/Stirling/
> --
> Morris Dovey
> DeSoto Solar
> DeSoto, Iowa USAhttp://www.iedu.com/DeSoto/
Hi Morris:
Thanks for the link, very interesting idea about using the fluidyne as
a pump to move the water up to an upper storage tanks and then drive a
generator on the way down to the collection tank?
The 1100 gal per hour seems quite impressive. Have you taken this
idea further to a complete system yet?
Gee whiz, did I miss something? I read that fluidyne pumps had a head of
only a few feet so I gave up on that idea. If they could pump 100' all we
would have to do is have two tanks and a hill.
I guess I'd better go back and read Morris' link again.
I also found the link below close to what I was looking for because of
your reference to fluidynes, so thanks for the nudge.
http://www.keveney.com/Stirling.html
Michael
> designs, your experience, etc?
> The design and build might make a good homepower article.