Posted by ads on May 25, 2015, 1:41 am
On Sun, 24 May 2015 17:51:41 -0400, Ecnerwal
> adsDUMP@wizardanswers.com wrote:
>
>> wrote:
>>
>> >On 7/14/2014 9:56 AM, Jim Rojas wrote:
>> >> Has anyone here made one yet? I am building a scaled down version to run
>> >> a 5hp engine for emergencies. I once went 2 weeks without power due to a
>> >> bad storm here in Florida.
>> >>
>> >
>> >Ok. I finally got the main body, burner tube and hopper all cut and
>> >ready for welding.
>> >
>> >Jim Rojas
>> >
>>
>> Keep us posted on how well it works. Pictures and dimensions of a
>> working unit would be appreciated.
>
>You are aware of APL, I hope...?
Yes.
But it's always good to hear from those with the most recent
real-world experience.
Posted by ads on May 25, 2015, 2:05 am
On Sun, 24 May 2015 17:51:41 -0400, Ecnerwal
> adsDUMP@wizardanswers.com wrote:
>
>> wrote:
>>
>> >On 7/14/2014 9:56 AM, Jim Rojas wrote:
>> >> Has anyone here made one yet? I am building a scaled down version to run
>> >> a 5hp engine for emergencies. I once went 2 weeks without power due to a
>> >> bad storm here in Florida.
>> >>
>> >
>> >Ok. I finally got the main body, burner tube and hopper all cut and
>> >ready for welding.
>> >
>> >Jim Rojas
>> >
>>
>> Keep us posted on how well it works. Pictures and dimensions of a
>> working unit would be appreciated.
>
>You are aware of APL, I hope...?
Are you aware that their cheapest "kit" is now $6,995?
The downloadable plans are available for the older versions, but not
the piece parts. That page will display briefly, then clear and give
a "not found" message.
If someone cuts their own parts, I'd like to see what they make.
Posted by ads on May 25, 2015, 2:13 am
On Sun, 24 May 2015 22:05:52 -0400, ads@wizardanswers.com wrote:
>On Sun, 24 May 2015 17:51:41 -0400, Ecnerwal
>>You are aware of APL, I hope...?
>
>Are you aware that their cheapest "kit" is now $6,995?
http://www.allpowerlabs.com/products/gasifier-kits
>
>The downloadable plans are available for the older versions, but not
>the piece parts. That page will display briefly, then clear and give
>a "not found" message.
>
>If someone cuts their own parts, I'd like to see what they make.
Posted by Jim Wilkins on May 25, 2015, 10:52 am
> On Sun, 24 May 2015 22:05:52 -0400, ads@wizardanswers.com wrote:
>
>>On Sun, 24 May 2015 17:51:41 -0400, Ecnerwal
>
>>>You are aware of APL, I hope...?
>>
>>Are you aware that their cheapest "kit" is now $6,995?
>
> http://www.allpowerlabs.com/products/gasifier-kits
http://www.tinytechindia.com/steampowerplan.htm
Posted by Jim Rojas on May 25, 2015, 12:48 pm
On 5/25/2015 6:52 AM, Jim Wilkins wrote:
>> On Sun, 24 May 2015 22:05:52 -0400, ads@wizardanswers.com wrote:
>>
>>> On Sun, 24 May 2015 17:51:41 -0400, Ecnerwal
>>
>>>> You are aware of APL, I hope...?
>>>
>>> Are you aware that their cheapest "kit" is now $6,995?
>>
>> http://www.allpowerlabs.com/products/gasifier-kits
>
> http://www.tinytechindia.com/steampowerplan.htm
>
>
>
$6,995 for something you can make yourself for under $00 is a reach.
These guys just lost their way and are now solely interested in making
money. This now limits their market to the select few.
Jim Rojas
>
>> wrote:
>>
>> >On 7/14/2014 9:56 AM, Jim Rojas wrote:
>> >> Has anyone here made one yet? I am building a scaled down version to run
>> >> a 5hp engine for emergencies. I once went 2 weeks without power due to a
>> >> bad storm here in Florida.
>> >>
>> >
>> >Ok. I finally got the main body, burner tube and hopper all cut and
>> >ready for welding.
>> >
>> >Jim Rojas
>> >
>>
>> Keep us posted on how well it works. Pictures and dimensions of a
>> working unit would be appreciated.
>
>You are aware of APL, I hope...?
Yes.