Posted by *clare* on May 25, 2012, 6:23 pm

Any of you bright fellows ever get into a Xantrax 1000 inverter?

(XPower 1000) I have one here that leaked all the magic smoke out of 2

Mosfets to the point I cannot read the part mumbers. There are 4

devices on one side and 10 on the other. The 2 fried devices are the

second and fourth of the four, counting from the DC IN end. The 2 that

are left are 1404 N-Channel fets, I suspect the dead ones are P

channels, but they could be N Channel as well. If P Channel I'm

suspecting the number will be 4905, but that is also just a somewhat

educated guess. -or even just a S.W.A.G.

Posted by *bob haller* on May 26, 2012, 1:28 am

On May 25, 2:23pm, cl...@snyder.on.ca wrote:

*> Any of you bright fellows ever get into a Xantrax 1000 inverter?*

*> (XPower 1000) I have one here that leaked all the magic smoke out of 2*

*> Mosfets to the point I cannot read the part mumbers. There are 4*

*> devices on one side and 10 on the other. The 2 fried devices are the*

*> second and fourth of the four, counting from the DC IN end. The 2 that*

*> are left are 1404 N-Channel fets, I suspect the dead ones are P*

*> channels, but they could be N Channel as well. If P Channel I'm*

*> suspecting the number will be 4905, but that is also just a somewhat*

*> educated guess. -or even just a S.W.A.G.*

a buddy of mine tried to fix one, the parts cost were unreal and parts

hard to find.....'

he finally gave up and bought a new inverter

Posted by *news* on May 26, 2012, 2:55 am

On Fri, 25 May 2012 14:23:02 -0400, clare@snyder.on.ca wrote:

*>Any of you bright fellows ever get into a Xantrax 1000 inverter?*

*>(XPower 1000) I have one here that leaked all the magic smoke out of 2*

*>Mosfets to the point I cannot read the part mumbers. There are 4*

*>devices on one side and 10 on the other. The 2 fried devices are the*

*>second and fourth of the four, counting from the DC IN end. The 2 that*

*>are left are 1404 N-Channel fets, I suspect the dead ones are P*

*>channels, but they could be N Channel as well. If P Channel I'm*

*>suspecting the number will be 4905, but that is also just a somewhat*

*>educated guess. -or even just a S.W.A.G.*

Ask you question on one of the alternate power groups on Yahoo, such

as http://groups.yahoo.com/group/12VDC_Power/?yguid24544628

> Any of you bright fellows ever get into a Xantrax 1000 inverter?> (XPower 1000) I have one here that leaked all the magic smoke out of 2> Mosfets to the point I cannot read the part mumbers. There are 4> devices on one side and 10 on the other. The 2 fried devices are the> second and fourth of the four, counting from the DC IN end. The 2 that> are left are 1404 N-Channel fets, I suspect the dead ones are P> channels, but they could be N Channel as well. If P Channel I'm> suspecting the number will be 4905, but that is also just a somewhat> educated guess. -or even just a S.W.A.G.