Posted by Kitty on July 20, 2007, 3:52 pm
Anyone out there have experience with Sunpower's 210 White panel? Or
any of Sunpower's modules? Good? Bad? Ugly? Thanks.
Posted by R.H. Allen on July 20, 2007, 6:02 pm
Kitty wrote:
> Anyone out there have experience with Sunpower's 210 White panel? Or
> any of Sunpower's modules? Good? Bad? Ugly? Thanks.
I have one sitting in my office, does that count? :-)
Seriously, though, I haven't heard anything bad about them. The one
thing you should be mindful of is that they're made slightly differently
from most PV modules, and for best results your system should have a
positive ground if you use them (your installer should know what that
means if you don't, or at the very least should ask Sunpower about it).
For various reasons this makes them unsuitable for off-grid use, IMO,
but they should be just fine for grid-connected applications.
Posted by Martin Riddle on July 21, 2007, 8:36 pm
>The one thing you should be mindful of is that they're made slightly
>differently from most PV modules, and for best results your system should
>have a positive ground if you use them (your installer should know what
>that means if you don't, or at the very least should ask Sunpower about
>it). For various reasons this makes them unsuitable for off-grid use, IMO,
>but they should be just fine for grid-connected applications.
I looked at the data sheet and I dont see the rational for your statement.
Is it a mechanical construction reason? Please elaborate...
Cheers
Posted by Roderick on July 21, 2007, 8:57 pm
> >The one thing you should be mindful of is that they're made slightly
> >differently from most PV modules, and for best results your system should
> >have a positive ground if you use them (your installer should know what
> >that means if you don't, or at the very least should ask Sunpower about
> >it). For various reasons this makes them unsuitable for off-grid use, IMO,
> >but they should be just fine for grid-connected applications.
> I looked at the data sheet and I dont see the rational for your statement.
> Is it a mechanical construction reason? Please elaborate...
> Cheers
I heard something about a unique back-contact construction of their
cells, which needs a genuine earth ground to get rid of charge-
buildup. I could be wrong, though.
Posted by Martin Riddle on July 21, 2007, 9:34 pm
>> >The one thing you should be mindful of is that they're made slightly
>> >differently from most PV modules, and for best results your system
>> >should
>> >have a positive ground if you use them (your installer should know what
>> >that means if you don't, or at the very least should ask Sunpower about
>> >it). For various reasons this makes them unsuitable for off-grid use,
>> >IMO,
>> >but they should be just fine for grid-connected applications.
>>
>> I looked at the data sheet and I dont see the rational for your
>> statement.
>> Is it a mechanical construction reason? Please elaborate...
>>
>> Cheers
> I heard something about a unique back-contact construction of their
> cells, which needs a genuine earth ground to get rid of charge-
> buildup. I could be wrong, though.
Ok, I see. They recomend it
http://www.sunpowercorp.com/homeowners/inverters.html
Cheers
> any of Sunpower's modules? Good? Bad? Ugly? Thanks.