auto disconnect/connect

 Is there a device which determines how many volts remain in a
connected 12v battery and automatically disconnects at a preset
voltage and reconnects at another preset voltage. The presets being
variable and determined by the user.
If so could you tell me what its called please.
I would be grateful for advice,
regards
ukmp

 
| Is there a device which determines how many volts remain in a
| connected 12v battery and automatically disconnects at a preset
| voltage and reconnects at another preset voltage. The presets being
| variable and determined by the user.
| If so could you tell me what its called please.
| I would be grateful for advice,
| regards
|
http://batterybuddy.com/

as close as you'll get.

Cheers

 
|
|| Is there a device which determines how many volts remain in a
|| connected 12v battery and automatically disconnects at a preset
|| voltage and reconnects at another preset voltage. The presets being
|| variable and determined by the user.
|| If so could you tell me what its called please.
|| I would be grateful for advice,
|| regards
||
| http://batterybuddy.com/
|
| as close as you'll get.
|
| Cheers
|
|

I take that back ;)

This is exactly what your looking for...
http://www.tessco.com/products/displayProducts.do?groupIdD2&subgroupId '

Cheers'

 

ukmp@otherdayjob.gravytrain.co.uk wrote:


Technically what you need is a device called a 'comparator' linked to a
relay or similar )possibly solid-state mosfet).

Let me guess, to charge a battery from a PV panel ? Are you using a
'maximum power point' controller ? If not then DO !

Graham

 On Sun, 26 Oct 2008 18:56:02 +0000, ukmp@otherdayjob.gravytrain.co.uk
wrote:


MANY thanks for your helpful advice Martin and Eeyore!