Posted by Morris Dovey on November 12, 2009, 9:32 pm
A quick Google search turned up what might be a good starting point:
http://www.solarns.ca/contact.php (with phone and e-mail address)
...and on their site, I found a list of NS suppliers (with contact
information for most):
...and a link to Wayne Langille's project page (mind the wrap):
(I don't have any relationship with any of the above)
DeSoto, Iowa USA
Posted by schooner on November 12, 2009, 10:49 pm
Or they can just email the address on the site that Wayne's panel is on or
email me directly and I can provide his home number and email, which I
stated above. It isn't that complex; I'm not sure what your point was with
Posted by Morris Dovey on November 13, 2009, 1:11 am
My interest (and the point of my post) was to provide information the OP
could use to make a good decision, not to make his choice for him by
funneling him to a single source.
I've seen a fair number of projects conceived and executed in ignorance
that've resulted in marginal results or outright failure - but I've
never heard of a project that suffered because of too much knowledge.
DeSoto, Iowa USA
Posted by jmygann on November 13, 2009, 5:33 am
I am trying a similar project ... a 20x40' shop ... working on a
trying black felt and possibly a Solar Closet
Anyone done a solar closet ? Need help on how to store the heat ??
Posted by schooner on November 13, 2009, 11:27 am
Ok, was sure since you post was in reply to me, not the OP. Don't believe
anyone was funneling the OP to one source, was merely providing a source
that was within his region. Can never have too much info for sure. Any
chance of some detailed pics of your panels along with some performance
numbers/readings in the name of knowledge?