Posted by dq on July 20, 2006, 11:33 pm
Anybody remember a company that used to make a solar storage tank out
of two sleeves of some sort of poly material..where you cut
iso-insulation, iserted it between the sleeves which then supported an
internal pvc liner. (thinking they were located in Maine) I have 2
that I have been using for over 20(?) years as a water cistern. The
internal liner is finally giving away at the seams and need some sort
of replacement. The location is such that I can't get a "hard" tank in
there now. Having a hard time finding a liner that would be 5' in
diameter and 5' deep. Any thoughts out there???
much obliged! -dq-
Posted by DJ on July 21, 2006, 1:14 am
Sounds like a hot tub to me, try those guys!
Posted by SJC on July 21, 2006, 9:19 pm
You could go buy a $0 10' x 3' soft side pool and put in in a box.
If you use a heat pump and do not take the water above 90F it might =
Posted by Charlie on July 23, 2006, 1:29 pm
Can you spray the interior with 'spray on' bed liner designed for pickup
Posted by AstickfortheMULE on July 29, 2006, 4:21 am
epdm liner should be less than $00 for 15x15.